Self-Install Directions

[Step One]		Plug the DC Cord into the '24V DC IN' port on the PoE, then plug the other end into the wall.
[Step Two]		Plug one end of the outdoor Ethernet cable into the PoE port of the PoE injector and the other end of the cable into the RJ-45 Port/LAN Port on the Antenna.
[Step Three]		Place the unit in an appropriate location, where it will get the strongest signal from the nearest tower. Signal strength will be marked by the signal indicator lights. Be Patient! This can take several minutes.

[Step Four ]		Plug one end of the Ethernet cable into the LAN port of the PoE injector and the other end into a network port on your PC/Notebook or into your wireless router.

[Step Five ]		The antenna is already programmed and, as soon as it catches the signal from the Genesis tower, will give instant access to the internet. However, like your computer, the antenna may take several minutes to boot up.

205 SW Second Street Braham, MN 55006 - local/320.396.2990 - toll free/888.383.8837 - email/info@genesiswireless.com

Proudly Serving East Central Minnesota Since 1999!